Daily Archives: January 13, 2018

PLUGNMAKE FABLAB DELFT·FRIDAY, JANUARY 5, 2018 Mario Francese This morning I found my bike lying on the ground, probably because of the wind (living in the Netherlands it happens quite easily ) and the front light holder was broken. I use the bike on an everyday basis to do my […]

3D printed Bike’s light holder

PLUGNMAKE FABLAB DELFT·THURSDAY, DECEMBER 28, 2017 Maaike Kok The goal of this project is to create a block tower for children, which consist of 6 differently sized cubes. Each cube is built out of five plywood sides, so the cubes function as boxes. The five wooden sides are connected to […]

Laser cut wooden block tower

PLUGNMAKE FABLAB DELFT·TUESDAY, NOVEMBER 21, 2017 Mario Francese Scope of this project was to fix the extruder of one of our printers. Last week I noticed that our orange ERP printer had a small issue on the extruder. The pins that hold the motor in place were broken (probably one […]

3D printed extruder bracket

PLUGNMAKE FABLAB DELFT·WEDNESDAY, NOVEMBER 8, 2017 Chiara Esposito Scope of this project was to make coat-hangers in the entrance room of my house, where a wall-rack or a standing one would have turned out too bulky. The space is characterized by the wooden balustrade of the stairs coming up from […]

Balustrade Coat-Hanger/Vases